Compuprint 9060LA Programmer Manual - Manual (Page 32)

30
Function Command
Vertical Control
Line Feed LF
Form Feed FF
Advance paper n base units (1 < n < 255) set with the ESC [ \
command ESC J (n)
Set line spacing to 1/8 lines ESC 0
Set line spacing to 7/72 inch ESC 1
Set line spacing to n base units (1 < n < 255) set with the ESC [
\ command ESC 3 (n)
Set line spacing to n/180 inch (in AG mode) (1 < n < 255) ESC 3 (n)
Preset line spacing to n/72 inch ESC A (n)
Preset line spacing to n/60 inch (in AG mode) ESC A (n)
Set line spacing to 1/6 inch or to the value preset by line
spacing command ESC A (n) ESC 2
Change graphics line spacing base to 1/216 or 1/180 inch (for
ESC J and ESC 3). Default value is 1/216" (1/180" in AG Mode) ESC [ \ (m
1
)(m
2
)(t
1
) ... (t
4
)
m
1
= 4, m
2
= 0, 0 < t
1
< 255, 0 < t
2
< 255,
t
3
= 0, t
4
= 180 or 216