Compuprint 3046 Installation - Manual (Page 3)

Figure 2
3. Turn the ribbon tension knob according to the direction shown by the arrow on the
cartridge. Hold the handle of ribbon cartridge and push the cartridge gently down. Make
sure the plastic hook of ribbon cartridge click into the grooves inside the printer as in
figure 3.
Figure 3
4. Set the ribbon between the print head and the metal septa and tense the ribbon again.
Check if the ribbon can slide freely from side to side in the channel between the print head
and metal septa.
Figure 4
5. Reinstall the transparent sheet holder.