Compuprint 3046 Programmer Manual User Manual
Page 22
Signal Name Pin N°
Source
Description
AUTOFEEDX
T
14
HOST
Active low level signal.
GND
16
-
Logical ground level (0V).
CHASSIS
GND
17 -
Frame
ground.
+ 5 VDC
18
PRINTER
Is the DC voltage supplied by a component that limits the driven
capability up to 100 mA.
SIGNAL
GND
19-30 -
Signal
ground.
INIT
31
HOST
Active low level signal. Indicates, that the printer is initializing.
The BUSY signal is forced high.
ERROR
32
PRINTER
When low, this signal indicates that the printer is off-line, there is
an off-line request from the operator panel, or the printer is in an
error state .
+5V
35
PRINTER
Pulled up to signal.
SELECTIN
36
HOST
Active low level signal. Enables the printer.
This manual is related to the following products: