Coloronix 6″ RGB Pathway Light - Manual (Page 9)

Install Fixture
e Mounting Brackets and install the Housing using the two Wood
Screws as shown.
wn
Note: In order to comply with established electrical code, the installer must seal the
rea around the Luminaire Canopy and the Wall, with type of caulking compound
Not
Mounting
1. Rotate th
2. Install luminaire Face-Place with the two Mounting Screws (provided) as sho
in figure below.
a
such as GE 100% or Dow Corning 100% silicone to provide a watertight seal in
accordance with the differing surface textures of the wall.
e: Install Fixture Canopy Flush to the Wall.
Page 9—Coloronix RGBW Pathway Lighting Manual V1.0