Codan Radio MT-3 - Manual (Page 47)

MT-3 ANALOG RADIO SYSTEMS | USER GUIDE
Chapter 5: Radio System Components Page 39
TUNING AND MAINTENANCE TOOLS
To facilitate testing, alignment and maintenance for the MT-3 radio systems, extender cards can be
used to extend the individual modules out from the subrack. Extender kits (extender card plus a four
foot cable) allow the modules to be extended out to a bench for servicing.
The following extender cards and kits are available:
EC-96D1 (direct connect) or EC-96K-1.22 (card and cable)
Used for the 96 pin control cards (AC-3L-96, AC-3E, AC-3M-96, AC-3S-96 and CI-PM-3).
EC-48RD (direct connect) or EC-48RK-1.22 (card and cable)
Used for all receiver, transmitter, power amplifi er and system regulator modules.
Figure 5-10 shows the 96 pin and 48 pin direct connect extender cards.
Figure 5-10: EC-96D1 and EC-48RD Direct Connect Extender Cards
The A-TK-01 tool kit includes a number of spare parts for the MT-3 radio system, including tuning tools,
guide rails, transient suppressors, diodes, a fuse, dust caps, shunt jumpers, ESD wrist strap, and
various screws and hardware.