Dreamer Design Rebound GST - Manual (Page 3)

foam protector
push button
Make sure the foot brake is in the
unlocked, up, position.
To put the rear wheels on, push the button on
the wheel while pushing the wheel axle into
the stroller frame.
Remove and discard the foam protectors on
the wheel axles.
be sure to discard the plastic bags from the wheels -
they are a suffocation hazard for children
check to make sure the wheels are
secure before each use
a s s e m b l y
Tip the stroller back so it is resting on its
handle and rear wheels to put the front
wheel on.
Remove the fork tip protectors.
Make sure the brake release lever is
pointed out, away from the stroller.
lever pointed out