Clipcomm BS-H100 - Manual (Page 17)

15
Supplement
Unable to
power on
Unable to
talk using
BS-H100
Unable to pair
BS-H100 and
a Bluetooth
headset
Connect BS-H100 with a
power adapter and plug it in
the power supply referring
to the installation on page 4
Connect telephone line
properly referring to the
installation on page 4
Pair and connect BS-H100
with a headset following the
pairing and connecting
procedure on page 6
Pair and connect BS-H100
with a headset following the
pairing and connecting
procedure on page 6
Check the power
adapter
Check the
telephone cable
Check if BS-H100
is connected with a
Bluetooth headset
Check if BS-H100
and a Bluetooth
headset are in pairing
standby mode
[Troubleshooting]
In case the product does not function correctly, please follow
the corrective action given in the table below. If the problem is
not solved even after performing the corrective actions, please
contact the dealer from whom BS-H100 was purchased.
Status Corrective action Signal Sound