Setting the clock, Radio operation, Sound controls – Dolby Laboratories LS5000DVD User Manual

Page 6

SETTING THE CLOCK

1. Press and hold the Power / Mode button to turn the unit On.
2. Press and hold the Display button. The clock will start

flashing, indicating the unit is in the clock setting mode.

3. Within 5 seconds, continuously press the Fast Reverse

button until the desired Hour is set. To quickly scroll
through the Hours, press and hold the same button. Note
the AM or PM indicator in the display.

4. Continuously press the Fast Forward button until the

desired Minute is set. To quickly scroll through the Minutes,
press and hold the same button.

5. The unit will exit the clock setting mode if either button is

not pressed within 5 seconds.

Note: To display the clock while in Radio, CD/DVD or AUX
mode, press the

Display button.

Indicator

Automatically Store Stations

Select a Band (if needed). Press and hold the

AS/PS button

for more than three seconds. The tuner will search for the six
strongest stations and store them in memory. The new sta-
tions replace stations that were already stored in the current
band.

Preset Scan

Select a Band (if needed). Press the AS/PS button. The tuner
scans for preset stations stored in the current band and paus-
es for five seconds at each station. When a desired station is
reached, press the AS/PS button again to stop scanning.

RADIO OPERATION

Audio Mode Selection

Select the desired audio mode by pressing the

SEL button.

The modes will be displayed the following order: Volume,
Bass, Treble and Balance.

Volume

Increase the volume by pressing the button. Decrease the
volume by pressing the button.

Bass

Press

SEL button two times. Increase the Bass by pressing

the button. Decrease the Bass by pressing the button.

Treble

Press

SEL button three times. Increase the Treble by pressing

the button. Decrease the Treble by pressing the button.

Balance

Press

SEL button four times. Adjust the Balance by pressing

either the button or the button.
R10 = Right speakers only
00 = Equal sound right and left
L10 = Left speakers only

Mute

Press and release the

Mute / Loud button once to mute the

audio level. "MUTE" will appear in the display.

Loud

Press and hold the

Mute / Loud button to enhance the high

and low frequency sound quality. "LOUD" will appear in the
display.

SOUND CONTROLS

LS5000DVD_UM.qxp 4/18/05 10:37 Page 6