CHIAYO CT-711 - Manual (Page 3)

2.Fitness centre broadcast use.
System recommendation:
CT-800 ( several, depending on the number of TV sets ), CR-711 ( many,
privately own by club members )
Each broadcast must use a dedicated frequency for transmission and all
the frequencies used must be interference-free.
3.Guided tour
System recommendation:
CT-711 ( one ), CR-711 ( many )
CT-800
CR-711
CT-800
CT-800
CT-800
Channel:1
Channel:2
Channel:3
Channel:4
CR-711
CR-711
CR-711
Charging the batteries
First, make sure the types of the battery mode and batteries installed are
all NiMH. Secondly, both batteries have to be of the same brand/
specification.
When the battery-status LED keeps flashing, it means the batteries are
weak and recharging is thus necessary. There are 2 methods of charging,
namely via
A: AC adaptor-Plug the connector of the adaptor into the DC IN jack of the
transmitter and the adaptor to a wall AC outlet.
B:Charger-Set CR-711 vertically into the charger jack and have the
charging points contact the charger correctly.
During the charging process, the battery-status indicator LED will keep
flashing. As long as the process is completed, "FULL" will be shown on
the display and the LED will stop flashing and keep lighting until this
transmitter is removed from the charger.
Belt clip
This uniquely designed belt clip(15) allows 360 rotation. Select the best position
to achieve your optimum comfort. °
9 2
2.Fitness centre broadcast use.
System recommendation:
CT-800 ( several, depending on the number of TV sets ), CR-711 ( many,
privately own by club members )
Each broadcast must use a dedicated frequency for transmission and all
the frequencies used must be interference-free.
3.Guided tour
System recommendation:
CT-711 ( one ), CR-711 ( many )
CT-800
CR-711
CT-800
CT-800
CT-800
Channel:1
Channel:2
Channel:3
Channel:4
CR-711
CR-711
CR-711
Charging the batteries
First, make sure the types of the battery mode and batteries installed are
all NiMH. Secondly, both batteries have to be of the same brand/
specification.
When the battery-status LED keeps flashing, it means the batteries are
weak and recharging is thus necessary. There are 2 methods of charging,
namely via
A: AC adaptor-Plug the connector of the adaptor into the DC IN jack of the
transmitter and the adaptor to a wall AC outlet.
B:Charger-Set CR-711 vertically into the charger jack and have the
charging points contact the charger correctly.
During the charging process, the battery-status indicator LED will keep
flashing. As long as the process is completed, "FULL" will be shown on
the display and the LED will stop flashing and keep lighting until this
transmitter is removed from the charger.
Belt clip
This uniquely designed belt clip(15) allows 360 rotation. Select the best position
to achieve your optimum comfort. °
9 2