Cata MC 28 D WH - Manual (Page 44)

Operation Instructions
1. Clock Setting
When the microwave oven is electrifi ed, the LED will display “0:00”, buzzer will ring once.
1) Press Kitchen Timer/Clock twice to select clock function, the hour fi gures will fl ash.
2) Turn “ ” to adjust the hour fi gures, the input time should be within 0--23.
3) Press Kitchen Timer/Clock , the minute fi gures will fl ash.
4) Turn “ ” to adjust the minute fi gures, the input time should be within 0--59.
5) Press Clock/Kitchen Timer to fi nish clock setting. “:” will fl ash, and the time will light.
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you press “STOP/CLEAR”, it will exit the setting state.
2. Microwave Cooking
Press Microwave./Grill/Combi. the LED will display “P100”.
Press Microwave./Grill/Combi. for times or turn “ ” “ to choose the power you want, and “P100”, “P80”
“P50”, “P30” or “P10” will display for each added press. Then press Start/+30Sec./Confi rm “ to confi rm, and
turn “ ” to set cooking time from 0:05 to 95:00. Press Start/+30Sec./Confi rm again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can operate the oven as the
following steps.
1) Press Microwave./Grill/Combi. once, the screen display “P100”.
2) Press Microwave./Grill/Combi. once again or turn “ ” to choose 80% microwave power.
3) Press Start/+30Sec./Confi rm to confi rm, and the screen displays “P 80”.
4) Turn “ ” to adjust the cooking time until the oven displays “20:00”.
5) Press Start/+30Sec./Confi rm to start cooking.
NOTE: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min
: 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 seconds
30---95 min : 5 seconds