PSC Falcon 5500 - Manual (Page 13)

Configuration Settings
Addendum
9
RFID Settings
1. Go to Start > Settings > Control
Panel . Double-tap the Decoding
icon.
2. Select Configure > RFID .
3. Choose one of the available
options.
Report Settings
In the RFID Decoding Properties, do the
following to view or modify Report Set-
tings:
1. Under Decoding Properties , go to
Configure > RFID > Report Settings.
2. Report Frequency controls how often
RFID tag data is reported to an
application. When set to a specific
number of tags, data is reported
when at least that many new tags
have been read. When set to
Infi-
nite, data is only reported when a
painting operation is complete.
3. Select the checkboxes for Read Class 0 Tags, Read Class 1 Tags or Read
Class 1 Gen 2 Tags to enable/disable the device to read each class of RFID
tags. Improved performance can be achieved by enabling only the class
of tags which will be used, if known.
At least one of the tag types must be enabled.