Caple C854i - Manual (Page 17)

17
Problem Possible causes What to do
F3-F8 Temperature sensor failure Please contact the supplier.
F9-FE Temperature sensor of the
IGBT failure. Please contact the supplier.
E1/E2 Abnormal supply voltage Please inspect whether power
supply is normal.
Power on after the power
supply is normal.
E3/E4 Abnormal temperature Please inspect the pot.
E5/E6 Bad induction hob heat
radiation Please restart after the
induction hob cools down.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and
damages to the induction hob.
Technical Specification
Cooking Hob C854I
Cooking Zones 4 Zones
Supply Voltage 220-240V~
Installed Electric Power 7000W
Product SizeD×W×H(mm) 590X520X56.5
Building-in Dimensions A×B (mm) 560X490
Weight and Dimensions are approximate. Because we continually strive to
improve our products we may change specifications and designs without prior
notice.
Installation
Selection of installation equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5 cm space shall be
preserved around the hole.
Be sure the thickness of the work surface is at least
30mm . Please select
heat-resistant work surface material to avoid larger deformation caused by the
heat radiation from the hotplate. As shown below: