Caple C738 - Manual (Page 8)

The manufacturing firm refuses all responsibility for any possible imprecision in this booklet, due
to misprints or clerical errors. It reserves the right to make all the changes that it will consider
necessary in its own products, without affecting the essential characteristics of functionality and
safety.
TECHNICAL CHARACTERISTIC TABLES
G30 - G31 28 - 30 71 - 50 27 1000 300
3 AUXILIARY
G20 20 - 99 72X Reg. 1000 300
G30 - G31 28 - 30 126 - 65 31 1750 440
2 SEMI-RAPID
G20 20 - 165 97Z Reg. 1750 440
G30 - G31 28 - 30 225 - 85 42 3000 750
1 RAPID
G20 20 - 290 115Y Reg. 3000 750
TAPE BY PASS
DIAMETER
mbar g/h L/h 1/100 mm 1/100 mm Max. Min.
BURNERS
N° DESCRIPTION
GAS
NORMAL
PRESSURE
NOMINAL
RATE
INJECTOR
DIAMETER
NOMINAL HEAT
INPUT (W)
G30 - G31 28 - 30 278 - 98 60 3800 1500
4
G20 20 - 367 135K Reg. 3800 1500
TRIPLE
RING
This product complies with EU Directive 2002/96/EC.
The crossed-out dustbin symbol reported on the appliance indicates that the appliance must be
disposed of separately from other domestic refuse at the end of its useful life. It must therefore be
delivered to a waste recycling centre specifi cally for electric and electronic equipment or returned to
the retailer at the moment of purchase of a new equivalent appliance.
The user is responsible for delivering the appliance to the appropriate collection centre at the end of its useful life,
Failure to do so may result in a fi ne, as provided for by laws governing waste disposal.
Differential collection of waste products for eventual recycling, treatment and environmentally friendly disposal helps
reduce possible negative effects on the environment and health, and also enables the materials making up the
product to be recycled.
For more detailed information on the available refuse collection systems, refer to the local Municipal Solid Waste
disposal centre or the shop where the product was purchased.
Producers and importers are responsible for fulfi lling their obligations as regards recycling, treatment and
environmentally friendly disposal by directly or indirectly participating in the collection system.