Assembly and dismantling of the side runner frames, Replacing the oven light bulb, Inside of oven – Caple CR1003SS User Manual
Page 36
36
Assembly and dismantling
of the side runner frames
– Fit the side runner frames into the
holes on the side walls inside the
oven (Fig. 8.8).
– Slide the tray and rack into the run-
ners (Fig. 8.9).
– To dismantle, operate in reverse
order.
Fig. 8.8
Fig. 8.9
Replacing the oven light
bulb
Switch the cooker off at the mains.
When the oven is cool unscrew and
replace the bulb with another one
resistant to high temperatures (300°C),
voltage 230 V (50 Hz), 15 W, E14.
Note: Oven bulb replacement is not
covered by your guarantee.
Inside of oven
This must be cleaned regularly.
Remove and refit the side runner frames
as described on the next chapter.
With the oven warm, wipe the inside
walls with a cloth soaked in very hot
soapy water or another suitable product.
Side runner frames, tray and rack can
be removed and washed.