Caple C9220 - Manual (Page 6)

6
Connecting the feeder
cable
To connect the feeder cable to the
cooker it is necessary to:
– Remove the two screws that hold
shield A behind the cooker.
– Open completely the cable clamp D.
– Insert the mains cable (type H05 RR-
F) of minimum 6 mm 2 section into
the cable clamp D.
– Connect the phase and earth cables
to terminal B according figure 1.3
and 1.4.
– Pull the feeder cable and block it
with the cable clamp D
– Re-mount shield A.
N.B. The earth conductor must be left
about 3 cm longer than the others.
A
D
B
Fig. 1.2
PE
1 2 3 4 5
N (L
2
) L
1
230 V
Fig. 1.3
Feedeer cable section
“Type H05RR-F”
230 V 3 x 6 mm 2 (**)
(**) – Connection with wall box connection.
– Contemporaneity factor applied
2 3 4 5 1
230 V ~
N(L 2 )
PE L1
Red
or
Brown
(Live) Black
or
Blue
(Neutral) Green
and
Yellow
(Earth)
Fig. 1.4
PE Earth
N Neutral
L Live