Caple DD910BK - Manual (Page 32)

DD910BK - DD910SS 13
PROBLEM SOLUTION
The cooker hood
does not work...
Check that:
• There is not a power outage.
• A specific speed has actually been selected.
• The 9 pole connection is inserted properly.
• The red reset key, found over the electrical system box, is pushed.
• Make sure that the wires of the 9 pole connection are inserted prop-
erly in the connector itself (during the connection phase, an excessive
pressure could bend the contacts).
The cooker hood has
low performances...
Check that:
• The motor speed selected is sufficient for the quantity of fumes and
vapors present in the room.
• The kitchen is ventilated well enough to allow air for intake.
• The charcoal filter is not worn out.( filtering version cooker hood).
• The air outlet channel is free and compliant with paragraph no. 2.
• The non-return valves of the suctioning unit are free to rotate.
The cooker hood
stops in the middle of
operation.
Check that:
• There is not a power outage.
• The omnipolar device has not tripped.
Any maintenance operation on your appliance should be carried out by:
• Either your retailer;
• Or another qualified professional technician, authorized for that brand.
OPERATIONAL
ANOMALIES
AFTER SALES SERVICE
NOTE
When calling, please mention the appliance details (Type Fig. 13a and equipment Fig. 13b and
production date Fig. 13c).
This information is mentioned on the rating label and the production date one placed on the
lower side of the downdraft.