Campomatic RC20BL - Manual (Page 8)

RC20BL
ENG
Maintenance
1. Clean the dust barrel
When finishing cleaning or the suction decreased obviously, cut off the
power supply and empty the barrel in time.
Refer to the following steps:
(1) Release the lock button and lift the top cover. (Fig15)
(2) Before remove the fi
shake it about 20 times up and down. (Fig16)
Fig15 Fig16
(3) Remove the filter bag and clean the dust in the barrel. (Fig17)
(4) Replace the bag and the top cover. (Fig18)
Fig17 Fig18
If you do not empty the barrel in time, the dust in the barrel will emit
smell. So please clean the barrel periodically. Before use again dry it.
2. Clean the filter
If the filter bag is blocked badly, clean it with water. If you need you can
use some neutrality cleanser.
(1) Remove the filter bag.
(2) Clean it (Fig19)
(3) Dry it (Fig20)
After dry it replace it according to primary steps.
Do not use boiled water to clean it or dry it wit fire.
3. Clean the vacuum cleaner and the accessories
8