Campomatic RB2200 - Manual (Page 10)

- 9 -
1. Switch off cleaner and disconnect power before any maintenance
2. Empty dust container after every use
3. Clean front filter every 3 months by washing it in mild dishwashing
solution and rinse well. Dry for 24 to 36 hours before refitting to the cleaner
refer to (Fig 10) Replace filter every 6 months
4. Wash dust container assembly every 6 months. It must be completely dry
for 2 to 3 days before reassembling back to gather.
1. Upon the completion of the operation of the cleaner, turn off its power
supply, and pull the power plug out of the power socket, then step on the
cord reeling button to reel in the power cord fully. Hang the floor brush onto
the floor brush hook, as is shown in Figure (8).
2. Place the cleaner in the dry indoor environment.
Maintenance of the Cleaner
Storage of the Cleaner
Figure (8)