Dual AM/FM/CD RECEIVER with Detach Face XD6320 - Manual (Page 6)

6
XD6320 OPERATION
General Operation
The clock will display 12-hour AM/PM time in USA frequency
spacing mode (PM 10:00). In European frequency spacing
mode, the clock will display 24-hour time (22:00).
In tuner mode, press and hold DISP then press TUNE ll
to select function priority display. “FREQ” will momentarily
appear in the display.
Note:
"FUNC" will appear in CD or AUX modes.
Radio frequency (tuner mode), CD track/elapsed time (CD
mode) or AUX (AUX mode) will be displayed by default.
Press and hold DISP then press TUNE nn to select time
display priority. “TIME” will momentarily appear in the
display. Clock will be displayed by default. Radio frequency
or CD track/elapsed time accessed by pressing DISP
momentarily.
Programs unit to display clock/no clock when unit is off.
Press and hold MODE then press PRESET 1 to select clock
priority on/off. “CLK ON” or “CLK OFF” will momentarily
appear in the display.
Press and hold for more than 2 seconds to RESET the unit
upon initial installation or if abnormal operation occurs.
The reset button is located behind the faceplate.
Press and hold AUDIO for 3 seconds to turn confirmation
beep on/off.
Press MUTE to silence the audio. “MUTE” will flash in the
display. Press MUTE again to cancel.
12/24-hour Clock
Programmable Display
Priority
Programmable Clock
Priority
Reset
Confirmation Beep
Mute