Campomatic KOR940T - Manual (Page 8)

8
kor940tt
OPERATION INSTRUCTIONS
BEEP DURING OVEN SETTINGS
Each time a pad is touched, a beep will sound to acknowledge the touch.
SETTING THE CLOCK
1. Touch CLOCK pad.
2. Touch CANCEL pad.
3. Use the number pads to enter the correct time. You must touch at least three numbers to set the clock(one for hour and two
for minutes).
4. Touch CLOCK pad again.
NOTE:
This is a 12-hour clock. When the oven was plugged in, “1:01” should have appeared in the display. To reset the time of
day, repeat the steps given above. You can check the clock time while cooking is in progress by touching the CLOCK pad.
SETTING THE OVEN TIMER
1. Touch TIME pad.
2. Enter the amount of time you want to count down by touching the number pads. Digit time is in minutes and seconds and set
left to right. Set one digit (a 5 for 5 seconds) or up to four digits (2405 for 24 minutes, 5 seconds).
3. Touch POWER pad.
4. Touch number pad 0.
5. Touch START pad.
NOTE:
·Touch TIME and then touch CANCEL to cancel TIME during timing process.
SETTING COOKING TIMES AND
POWER LEVELS
A. One-stage Cooking
1. Touch TIME pad.
2. Use the number pads to set a cooking time. You can set a cooking time from one seconds to 99 minutes and 99 seconds. If
you are setting a time greater than one minute, you must enter numbers for both minutes and seconds.
For example, to set 20 minutes, enter 2,0,0,0.
3. If you want to set a power level other than 100% power, touch POWER, then use the number pads to enter the power level.
You can set the power level from 1 to 9.
4. Touch START to start cooking.
USE THESE SINGLE DIGIT TO
REPRESENT POWER LEVELS
Number pad % of Power
1,0 100%
9 90%
8 80%
7 70%
6 60%
5 50%
4 40%
3 30%
2 20%
1 10%
0 0%
B. Two-stage Cooking
Some recipes require different stages of cooking at different temperatures.
ENG