Campomatic D862L - Manual (Page 16)

16
USING THE APPLIANCE
DOOR
GB
DESCRIPTION OF THE FUNCTIONS
!"
!#
The drier is the front-loading type. Pull the handle outwards, without forcing it, and
gently open the door. The appliance will stop if the door is opened during a drying
cycle. The drum will continue to rotate for a while, slowing down gradually to a stop.
ON/Off button: Press the button to switch on the appliance.
DRYING THE WASHING CORRECTLY
Proceed as follows:
A
Spin the washing.
B
Separate the items into types or fabrics.
Close any zips and fasten buttons and remem-
ber to empty the pockets of any clothing.
Turn jumpers inside out.
C
Open the door
Load the washing in the drum and remember
to load sheets from a corner fi rst.
It is advisable to load small and large items
together.
D
Close the door
Dry your hands (never touch electric appli-
ances with wet hands).
Insert the plug in the mains socket.
E
Press the ON/OFF button to switch on the
appliance.
Select the drying cycle recommended for the
load (see program table)
Press the start button to start the drying cycle
F
To stop the machine during a drying cycle,
simply open the door (the drum will slow
down then stop).
To continue the drying cycle, close the door
and press the start button.
G
After having removed the dry washing, clean
the fi lter as follows:
- Lift the fi lter
- Open it and clean it using a soft brush
- Close it and replace it in its seating
- The fi lter must be washed periodically
using soapy water in order to remove very
small particles.
Unplug the appliance from the mains supply.
Important:
Obviously, during a drying cycle the washing in the drum will be
hot. The washing is cooled during the cooling cycle.
To avoid being scalded by steam or burned by the hot washing,
do not open the door during the drying phase.