Af20, Caution, Overheating protection – Campomatic AF20B User Manual
Page 4: Automatic switch-off, Electromagnetic fields (emf), Test specifications/standard

AF20
Caution
- Place the appliance on a horizontal, even and stable surface. 
- This appliance is intended for normal household use only. It is not intended for use in environments 
such as staff kitchens of shops, offices, farms or other work environments. Nor is it intended to be 
used by clients in hotels, motels, bed and breakfasts and other residential environments. 
- If the appliance is used improperly or for professional or semi-professional purposes or if it is not
used according to the instructions in the user manual, the guarantee becomes invalid and we could 
refuse any liability for damage caused. 
- Always unplug the appliance after use. 
- Let the appliance cool down for approx 30 minutes before you handle or clean it. 
- Make sure the ingredients prepared in this appliance come out golden-yellow instead of dark or 
brown. Remove burnt remnants.
- The appliance with the micro switch inside, when pull out the pan during cooking, the appliance will
be shut-off power automatically.
Overheating Protection
- The appliance with overheating protection system, if the inner temperature control system invalid, 
the overheating protection is automatically turned on, the appliance is no longer ready to be used. 
Unplug the mains cord. 
 
- 
Only after the appliance has been left to cool down completely should the RESET button at the 
bottom of the machine (beside the rating label) be operated in order to use the airfryer again. 
Please use a pointed object for this purpose(refer to the figures hereinafter). 
Automatic switch-off
This appliance is equipped with a timer. When the timer has counted down to 0, the appliance 
produces a bell sound and switches off automatically. To switch off the appliance manually, turn the 
timer knob anticlockwise to 0. 
Note: If pull out the pan during cooking, the appliance will be switched off automatically, too.(Timer 
still in 
counting down
)
.
Electromagnetic fields (EMF)
This appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly 
and according to the instructions in this user manual, the appliance is safe to use based on scientific 
evidence available today. 
 
Test specifications/Standard:
IEC 60335-2-9: 2002 + A1: 2004 + A2: 2006 
IEC 60335-1: 2001 + A1: 2004 + A2: 2006 
EN 60335-2-9: 2003 + A1: 2004 + A2: 2006 + A12: 2007 + A13: 2010 
EN 60335-1: 2002 + A11: 2004 + A1: 2004 + A12: 2006 + A2: 2006 + A13: 2008 
EN
4
