Burst Electronics TC-3 - Manual (Page 12)

11 TC-3 SMPTE TIME CODE Generator/Reader
SMPTE Time Code Generator
Time Code Out Adjustment
B URST E LECTRONICS INC
A
LBUQUERQUE , NM 87
109 USA
(505) 898-1455
(505) 898-0159 FAX
www.burstelectronics.com
The TC-3
An improvement has been made to the TC-3. The Output
level of the Time Code Out signal can now be adjusted.
It is preset to 0 dBm, 0.775 Vac (2 volts peak to peak).
Some VTRs (such as the Sony 9800) might require a higher
audio signal.
The adjustment control is located on the rear panel between
the two RCA jacks. Adjust as required, minimum is 0 V,
max is 1.5 Vac (4.2 Vpp).