Burst Electronics MicroDA - Manual (Page 5)

Specifications:
Input: 1 Volt standard video (NTSC or PAL)
Input Impedance: HiZ (looping) or 75 Ohms, (jumper
selected)
Coupling: DC throughout
Internal Power: ±5 Vdc derived from external
12 Vdc
Outputs: Two, Four, or Eight, 75 Ohms
Output Voltage: 4 Vpp max
Delay Input to Output: 10ns
Output Impedance: 75 Ohms 1%
Frequency Response: DC to 33 MHz 0.2 dB
Gain: Unity, adjustable ±3 dB
S/N: 68 dB
Differential Gain: 0.03%
Differential Phase: 0.05°
Video Connector: BNC (4 pin MiniDIN
with Y/C Version)
Output Protection: Open or Short, infinite duration
Power: 120 VAC 60 Hz, 3 Watts, UL Listed
Wall Module (included)
DC Powered: 10 to 16 Vdc (polarity insensitive),
200 mA or less
Size MicroDA / 2EQ: 4.4W x 2.4H x 1.3D inches
Size VDA-4 / Y/C: 4.2W x 1.5H x 5.5D inches
Size VDA-4PC 0.75W x 3.95H x 4.95D inches
Size VDA-8: 5.6W x 1.5H x 7.0D inches
Warranty: One Year Parts and Labor
Video Distribution Amplifiers 5