BUG-O Systems Universal Bug-O-Matic - Manual (Page 21)

21
ARR-1080 ALUMINUM RIGID RAIL / CROSS SECTION / EXPLODED VIEW /
PARTS LIST
ALUMINUM RIGID RAIL is a rigid channel section made of high quality alloy to machine tool tolerance
as in the section view below. A machined gear rack is mounted on the rail, with which the drive pinion
of the carriage meshes. The wheels of the carriage travel in opposed grooves at either side of the rail,
locking the carriage to the rail.
Heavy duty [H.D] aluminum four-legged rigid rail is sup-
plied in two lengths:
ARR-1080 [93-1/2" (2.37 m)] called 8' (2.37 m) rail
ARR-1085 [46-1/2 (1.18 m)] called 4' (1.18 m) rail.
Extra Heavy Duty aluminum four-legged rigid rail is also
available:
ARR-1250 [93-1/2" (1.18 m)] called 8' (2.37 m) rail
ARR-1200 [46-1/2" (1.18 m)] called 4" (1.18 m) rail.
PARTS LIST
ITEM PART NO. DESCRIPTION
1 ARR-1006 Rack
2 ARR-1027 Splicer Bar
3 ARR-1028 Carriage Bolt
4 ARR-1081 Rail Extrusion
5 FAS-0375 Screw, Hex Hd Cap 5/16-18
6 FAS-1370 Hex Nut 5/16-18
RAIL OPTIONS
With a simple carriage change, the Universal Bug-O-Matic with AHC can be made compatible with
any BUG-O rail. A brief description of each BUG-O rail type is provided below. Contact your BUG-O
representative for more information about these rails and the mounting options available.
3
4
6
5
2
1
RAIL FOR LONGER SPANS:
When unsupported rail paths longer than nominal 8' (2.37 m) rail are required, multiple sections of stan-
dard rail are mounted on plate, I beam, channel or box sections.
A
B
C
D
A 2.75" (70 mm)
B 4.0" (102 mm)
C 0.375" (9.5 mm)
D 0.875" (22 mm)
ARR CROSS SECTION VIEW