beautypg.com

Safety – BUG-O Systems CW-11 User Manual

Page 2

background image

2

SAFETY

PROTECT YOURSELF AND OTHERS FROM SERIOUS INJURY OR DEATH. KEEP

CHILDREN AWAY. BE SURE THAT ALL INSTALLATION, OPERATION, MAINTENANCE

AND REPAIR PROCEDURES ARE PERFORMED ONLY BY QUALIFIED INDIVIDUALS.

EQUIPMENT DAMAGE

POSSIBLE

ELECTRIC SHOCK can kill

1) The equipment is not waterproof. Using

the unit in a wet environment may result

in serious injury. Do not touch equipment

when wet or standing in a wet location.

2) The unused connectors have power on

them. Always keep the unused connec-

tors covered with the supplied protective

panels. Operation of the machine without

the protective panels may result in injury.

3) Never open the equipment without

first unplugging the power cord or

serious injury may result.

4) Verify the customer-supplied power

connections are made in accordance

with all applicable local and national

electrical safety codes. If none exist,

use International Electric Code (IEC)

950.

5) Never remove or bypass the equip-

ment power cord ground. Verify the

equipment is grounded in accordance with

all applicable local and national electrical

safety codes. If none exist, use Interna-

tional Electric Code (IEC) 950.

READ INSTRUCTIONS.

Read the instruction manual before

installing and using the equipment.

1) Do not plug in the power cord without

first verifying the equipment is OFF

and the cord input voltage is the same

as required by the machine or serious

damage may result.

2) Always verity both the pinion and wheels

are fully engaged before applying power or

equipment damage may occur.

3) Do not leave the equipment unattended.

4) Remove from the work site and store in a

safe location when not in use.

1) Never try to stop the pinion from mov-

ing except by removing power or by

using the STOP control.

2) Do not remove any protective panels,

covers or guards and operate equip-

ment.

MOVING PARTS can

cause serious injury.

FALLING EQUIPMENT

can cause serious

personal injury and

equipment damage.

Faulty or careless user installation is pos-

sible. As a result, never stand or walk

underneath equipment.