Bronkhorst FlowTune - Manual (Page 2)

BRONKHORST
Disclaimer
Even though care has been taken in the preparation and publication of the contents of this manual, we do not assume
legal or other liability for any inaccuracy, mistake, mis‐statement or any other error of whatsoever nature contained
herein. The material in this manual is for information purposes only, and is subject to change without notice.
Bronkhorst High‐Tech B.V.
July 2011
Symbols
Important information. Discarding this information could cause injuries to people or damage to the
Instrument or installation.
Helpful information. This information will facilitate the use of this instrument.
Additional info available on the internet or from your local sales representative.
Making changes in FlowTune will affect the current settings of the instrument. Unless you are fully
aware of the effect of the changes you are going to make, we recommend you do NOT use FlowTune.
Be aware that values can be entered outside of the specifications of the instrument. Make sure that the
instrument will not be used outside the specificied limits.
Special (but not only) attention should be given to:
- General compatibility of the instrument for the selected gas (e.g. degreased for O2 use)
- Sealing material
- Maximum pressure tested
- Leak integrity
- Valve orifice size.
Neglecting these considerations may cause serious damage or personal injury.
Page 2 FlowTune 9.17.046