Broadata Communications 235 Series - Manual (Page 16)

BCI 235 User’s Manual
Digital Fiber Optic S-Video/Audio/Data Transport System
Broadata Technical Support, [email protected] 17
2.2.2 Optical Fiber Connection
Most cable manufacturers identify individual fibers in the fiber
cable. Select an appropriate terminated fiber. Each unit’s optical
ports in the system are specified for use with Multimode
(62.5/125 micron) fiber, or Singlemode (9/125 micron) fiber.
Follow the ensuing instructions on installing and connecting
the fiber optic links:
1. Ensure the power is off before proceeding with the fiber
optic cable installation.
2. Prior to connecting the fiber optic cables, remove and save
the dust caps from the optical port of both the 235 units.
Clean the fiber optic connector and use a lint-free cloth
dampened with alcohol to thoroughly wipe the side and end
of the ferrule. Use Table 1 as a guideline when connecting
ST and FC connectors.
3. Cross-connect the fibers from one unit to the other
connecting the near end 235 unit’s optical TX port to the far
end 235 unit’s optical RX port as illustrated in Figure 2-8.
Figure 2-8
Fiber Optic Connection
D-OUT
D
PWR
TX
AUDIO
-- +
A
L
D-IN
+ --
R
DATA
+ - - I +
235T
-- O
S-VIDEO
1 2
VIDEO
1 2
D-OUT
D
PWR
RX
AUDIO
-- +
A
L
D-IN
+ --
R
DATA
+ - - I +
235R
-- O
S-VIDEO
1 2
VIDEO
1 2
LINK