0 operation – Broadata Communications 1100E Series User Manual
Page 11
BCI 1100E User’s Manual
Fiber Optic HD-SDI Digital Video Transport System
Broadata Technical Support, (800) 214-0222
12
To provide power to the 1100E, simply connect the power supply, already
provided with the units, and connect it to the wall jack. (You will find one
power supply per unit). Once the power supply has been connected to
the wall jack, connect the 12VDC to the unit and the unit should power
up immediately.
If you have any problems or concerns, regarding the installation, make
sure that you have taken the proper steps to ensure a proper power
connection. Otherwise, feel free to contact us for any questions you
may have.
3.0 OPERATION
After the installation procedure is completed, the units are ready for
operation. To operate the BCI 1100E units, simply apply power as
indicated in the previous step. Note that the following front panel link
status indicator, shown in Table 2 will be activated.