Broadata Communications Mini-3GHD - Manual (Page 8)

BCI Mini-3GHD User’s Manual
Miniature Fiber Optic 3Gb/s HD-SDI Digital Video Transport System
Broadata Technical Support, [email protected] 9
Table 1
Fiber Optic Connector Legend
2.3 DC Power Connection
Congratulations! You are now ready to power up the BCI Mini-3GHD
and set up your network connection. In order to make sure that you
have a proper installation, please observe the following:
1. Your AC jack has power.
2. The 5VDC power supply is working.
3. Your electrical system has proper grounding (this ensures that
your power supply does not suffer from voltage variations).
4. Power Surge Protection. This is optional, but highly
recommended. A UPS system provides voltage regularity as
well as prevents spikes from occurring, thus protecting your
Mini-3GHD from sensitive voltage conditions.
The Mini-3GHD derives power from an external 5VDC power supply.
This power supply is a wall-mounted AC/DC adapter, 95-240 VAC, 47
Hz to 63 Hz, at 0.5A. This power supply comes standard for the
Mini-3GHD unless otherwise specified.
To provide power to the Mini-3GHD, simply connect the power supply,
already provided with the units, and connect it to the wall jack. (You will
find one power supply per unit). Once the power supply has been
connected to the wall jack, connect the 5VDC to the mini-XLR power
adapter of the Mini-3GHD unit and the unit should power up immediately.
Description Connector Illustration
ST
Hold the connector by the strain-relief boot*
and insert the connector ferrule into the port.
Rotate the boot until the “key” engages in the
slot of the coupling. Push the connector
housing forward until it can be turned
clockwise to latch to the port.
*