Brinly BS-26 BH Cu. Ft. Tow-Behind - Manual (Page 7)

L-1884-C 7.
Figure 1.
Figure 2.
INSTALL HOPPER SUPPORT
TO THE HOPPER
3
Flat Washer (Nylon), 1/4”
Qty. 6
4
Bolt Hex, 1/4”x1-3/4”
Qty. 6
5
Lock Nut, Nylon, 1/4””
Qty. 6
1
2
3
4
5
1a. Install six 1/4 x 1-3/4 in. hex bolts (4),
and 1/4 in. thrust washer (3) through
top of hopper (2) and through support
frame (1), as shown.
1b. Secure bottom of bolt with 1/4 in. lock-
nut (5). To avoid damage to plastic, do
not overtighten hardware.
27
Bolt Hex, 5/16”x2-1/4”
Qty. 2
26
Hex Nut 5/16”
Qty. 2
27
2a. Attach Tow Tube (28) to the Hopper
Support (1)1b. Secure using two
5/16”x2-3/4” Hex Bolts (27) and two
5/16”-18 Hex Nuts (26).
1
28
26
ATTACH TOW TUBE
ASSEMBLY