Brinly LVS-33 BH PolyVAC System - Manual (Page 26)

L-1771-D
26.
Mower Deck
Mower Deck
TRACTOR PREPARATION
Option 3. The top of the Mower Deck Housing
is 3/8" or more above the mower deck. Install
Large or Small Mower Deck Bracket using
Carriage Bolt (101) (from inside Mower Deck)
and Flange Nut (107). Tighten securely. Thread
a second Flange Nut (107) (with Flange Up)
onto Carriage Bolts. Adjust those Flange Nuts
so they are flush with top of Mower Deck
Bracket over Flange Nuts Securing with two
more Flange Nuts (Flange Down). Tightn
Securely.
Align cut out Mower Deck Housing to discharge
opening in Mower Deck (under previously
installed Mower Deck Bracket) and mark the
three or two holes depending on Mower deck
Bracket type (Large, Small)
Drill 5/16" holes in the Mower Deck Housing.
Assemble Mower Deck Housing and to the
Mower Deck Bracket using 5/16" x 1" Carriage
Bolts (103), Flat Washers (106) and Lock Nuts
(109).
Option 4. The top of the mower deck has a
mounting bracket for the grass deflector. The
Small Mower Deck Bracket (with ears down)
can be mounted to grass deflector bracket on
Mower Deck using 5/16" x 1" Carriage Bolts
(103) and Lock Nuts (109).
Align cut out Mower Deck Housing to discharge
opening in Mower Deck (under previously
installed Mower Deck Bracket) and mark the
three or two holes depending on Mower deck
Bracket type (Large, Small)
Drill 5/16" holes in the Mower Deck Housing.
Assemble Mower Deck Housing to the Mower
Deck Bracket using 5/16" x 1" Carriage Bolts
(103), Flat Washers (106) and Lock Nuts (109).
The final step is to install Hose to Mower Deck
Housing that was previously assembled.
93
96
Flush as possible
Flush as possible
Flush as possible
93
99
93
OPTION 4
OPTION 3
Mower Deck
99
107
101
107
101
103
106
109
103
106
109
103
106
109
Mower Deck
Housing
Mower Deck
Housing
Mower Deck
Housing
3/8" or more
3/8" or more
50.
Staep 22.
Option 3
Hardware Bag F
Step 22.
Option 4
Hardware Bag F