Brinly AS-30 BH Aerator-Spreader - Manual (Page 3)

L-1711-BH.-3
3.
REFERENCE
Tools Required for Assembly:
* ½" wrench (2) * 3/4" wrench (2)
* Pair work gloves OR
* Hammer * 10" Adjustable wrench (2)
Notes:
A note about nuts used in the assembly of your Aerator Spreader:
1. Jam Nuts and Hex Nuts spin freely on the bolt threads. Usually a lock washer is used
to lock the nut securely in place.
2. Lock Nuts and Nylon Lock Nuts provide resistence after several turns on the bolt threads.
A wrench is normally required during installation.
Jam Nut Hex Nut
Lock Nut Nylon Lock Nut