Blu Bathworks TSP211 - Manual (Page 3)

2013-07
1 866 907 0122 blubathworks.com
®
2
CARTRIDGE CHANGE
Through years of use impurities and limescale could damage the cartridge. To replace it, refer-
ence the following instruction.
•
Shut off water supply to both inlets
• Remove the control lever (1), remove the screw (2), take off the control handle (3) and pull
out the cup (4).
• Pay attention not to lose the O-ring (5).
• Unscrew the flange (6) using 30mm/1 1 / 6 ” spanner. Remove the cartridge (7).
• Before re-assembling cartridge (7) clean its housing with wet cloth.
• Re-assembling the flange (6).
• Place the O-ring (5) and re-fit the cap (4).
• Re-fit the control knob (3) and fix it with the grub screw (2).
• Re-fit the lever (1).
IMPORTANT
In case of reduction of flow rate, dismantle the aerator and clean the filter inside or change it.