Blu Bathworks TSU131 - Manual (Page 7)

2013-07
1 866 907 0122 blubathworks.com
®
6
CARTRIDGE CHANGE
To replace it follow the instruction hereunder.
•
Shut off water supply to both inlets
• Remove the cap (1), remove the grub screw (2), take off the control handle (3) and remove
the screw (4).
• Remove the centering insert (5) and unscrew the cap (6).
• Pay attention not to lose the O-ring (7) and pull out the plate (8).
• Unscrew the flange (9) using 28mm/1 1 / 9 ' spanner. Remove the cartridge (10).
• Before re-assembling cartridge (10) clean its housing with wet cloth.
• Re-assembling the flange (9) and the plate (8), place the O-ring (7) and screw the cap (6).
• Re-fit the centering insert (5) and fix it with the screw (4).
• Place the control knob (3) and fix it with the grub screw (2)
• Re-fit the small cap (1).
IMPORTANT
In case of reduction of flow rate, dismantle the aerator and clean the filter inside or change it.