Blu Bathworks TSP141 - Manual (Page 5)

2013-07
1 866 907 0122 blubathworks.com
®
4
INSTALLATION STEP 3
• Place the three small cover plates (1).
• Place the O-rings (2) and screw the cap (3) to secure the cover plates.
INSTALLATION STEP 2
• Position the O-rings (2) in its site on the nuts (1).
• Screw the nuts (1), as per drawing (A), on the threaded rods.
• Once the correct position of the rings is reached, tighten the nuts
located under the wash basin mixer to fix the threaded rods.
•
(A)
INSTALLATION STEP 3
• Place the three small cover plates (1).
• Place the O-rings (2) and screw the cap (3) to secure the cover
plates.