Blu Bathworks SA0102 - Manual (Page 5)

4
1 866 907 0122 blubathworks.com
2014-05
®
w h e r e w a t e r m e e t s m o d e r n ®
188 Smithe Street, Vancouver, BC V6B 6A9 Canada | T 1.604.299.0122 | TF 1.866.907.0122 | F 1.604.299.0125 | blubathworks.com
®
w h e r e w a t e r m e e t s m o d e r n ®
188 Smithe Street, Vancouver, BC V6B 6A9 Canada | T 1.604.299.0122 | TF 1.866.907.0122 | F 1.604.299.0125 | blubathworks.com
®
blu·stone ™ cleaning & repair guide
blu·stone ™ is Blu Bathworks’ signature eco-friendly stone collection; a durable, low maintenance and hygienic material that is high
pressure injection molded, non-porous and anti-microbial. blu·stone ™ products are stain, scratch and impact resistant, and easy
to clean: after each use, simply wipe with a soft cloth to remove any surface dirt.
routine care
• Never expose blu·stone ™ to petroleum based products, such as paint removers, oven cleaners or other solvents
(Note: personal hygiene products and cosmetics will NOT damage the surface)
• We recommend that stains are removed within 24 hours
• Do not directly cut on the blu·stone
™ surface
• Blu Bathworks does not recommend exceeding US/ Canada maximum hot water temperature regulations of 150ºF/65ºC,
respectively. Exceeding stated temperatures could result in damage to blu·stone ™ products
standard cleaning
For standard cleaning of both gloss and matte finishes, we recommend using widely available cleaning products such
as Mr. Clean, Fantastik, VIM, CIF etc. Matte finished products may occasionally require a mildly abrasive product.
blu·stone ™ matte finish:
• For more difficult stains, use a mildly abrasive cream cleanser such as Soft Scrub, Comet Soft Cleanser, CIF or VIM
blu·stone ™ gloss finish:
• Do not use abrasive products or cream cleansers
scratched or damaged surfaces
blu·stone ™ matte finish:
• Ensure there is no surface dirt by flushing with water
• Rub the 600-grit sanding block, provided, in a gentle circular motion
• Higher grit sandpaper may be required to blend the repaired area to match the existing product finish
blu·stone ™ gloss finish:
• Ensure there is no surface dirt by flushing with water
• We recommend sanding the area starting with 600, 800 and 1200-grit sandpaper: begin with the lower number (coarser)
grit followed with each higher number (finer) in ascending order
• Finish by polishing the surface using a cloth and white polishing compound for automobiles
repairs
For more extensive repairs, send a photograph of your blu·stone ™ product to Blu Customer Service
([email protected]), who will inform you as to the most appropriate methods to use.
limited warranty
Blu Bathworks’ (“Blu”) warranty on blu·stone ™ products covers all defects in materials and manufacturing for a period of five (5)
years from the date of purchase. This limited warranty, starting on the original purchase date, is only offered to the original
purchaser who acquires the product directly from Blu or from its authorized dealers. This limited warranty does not apply to cases
in which a product was incorrectly installed, nor to damage due to negligence, misuse, thermal shocks, cigarettes, flames, natural
catastrophes or other accidents. Blu is not responsible for costs and claims that may arise from purchase of a product unsuited to
the structure of the existing building. Any transformation or alteration made to a Blu product automatically voids the warranty.
Blu’s warranty is limited to repair or replacement (with a product of equal value), provided the claim is made to an authorized dealer
or directly to Blu, within the warranty period. Labor costs and any other expenses entailed by replacement of a Blu product are not
covered by the warranty.