Beurer WL 32 - Manual (Page 21)

21
• Never immerse the device or mains part plug in water or
other liquids.
• Protect the device from knocks, damp, dust, chemicals,
marked temperature fluctuations, and nearby sources of
heat (ovens, heaters).
• Clean the device with a dry cloth.
• Do not use any abrasive cleaning products.
• Always replace all batteries at the same time and use bat-
teries of the same type. Do not use rechargeable batteries.
• Leaking batteries may damage the device. If you do not
intend to use the device for longer periods, remove the
batteries from the battery compartment.
• Leaking or damaged batteries may burn the skin therefore
use suitable protective gloves if this is the case.
8. Disposal
Please dispose of the device in accordance with
EC Directive – WEEE (Waste Electrical and Electro-
nic Equipment).
If you have any queries, please contact the appropriate
local authorities.
The empty, completely flat batteries should be disposed of
through specially designated collection boxes, recycling
points or electronics retailers. You are legally required to
dispose of the batteries.
Note: The codes below are printed on batteries
containing harmful substances: Pb = Battery
contains lead, Cd = Battery contains cadmium, Hg = Bat-
tery contains mercury.
9. What if there are problems?
If the time is not displayed correctly or the device does not
function correctly, the cause may be attributed to electro-
static discharge or other faults. Therefore, do not position
the device near to other devices, such as WLAN etc. To
remedy the problem, reset the device to the factory settings.
To reset the device to the factory settings, press in the
reset button on the underside of the device using a poin-
ted object.
If the problem persists, contact Customer Services.
10. Technical data
Wake-up light function OFF, 15, 30 minutes before
alarm
Snooze duration 5 to 60 minutes
Goodnight function Choose between 5, 10, 15,
30, 45, 60, 75, 90 minutes and
OFF.
Dimensions 12.3 x 12 cm
Weight 180 g
Mains part
Voltage supply
Input: 100-240 V, AC / 50/60 Hz
Output: 5.5 V, DC/500 mA