Beurer GS 39 - Manual (Page 13)

13
Display De FR GB eS RuS
0.0 Das Gerät
ist betriebs-
bereit
L'appareil est
prêt à
fonctionner
The device is
ready for use
El aparato
está
preparado
para
el servicio.
Прибор
готов к
работе
Now step onto the scale. Stand still on the scale with your weight distributed
evenly between both legs. The scale immediately begins to measure your
weight. After flashing twice the final measurement result appears on the dis-
play. (Fig. 3)
There is also an acoustic output. The scale switches off 10 seconds after you
step down from it. The measuring result remains visible during this time.
If the scale detects an error during weighing, “ ---- ” or “ Err ” appears in the
display (Fig. 4+5).
Display De FR GB eS RuS
Fehler Erreur Error Error Неисправность
If a weight of more than 150 kg is placed on the scale, “OVEr” is displayed
(Fig. 6).
Display De FR GB eS RuS
Überlastung Surcharge Overload Sobrecarga Перегрузка
Make sure that you always switch on the scale first and wait for the display “
0.0
” (Fig. 2) before
stepping on.
4.3 Weighing with storage function
The scale has 4 storage locations (buttons 1-4).
Switch on the scale as described in "4.2. Measuring weight"and wait until the display shows " 0.0"
(Fig. 2).
Now press the desired storage location (1, 2, 3 or 4).
For example, press the "1" button that appears in the upper left-hand corner of the display "User 1".
Display De FR GB eS RuS
User 1 Speicher-
platz 1
Emplacement
de mèmoire 1
Memory
space 1
Espacio de
memoria 1
Пользоватейски
елемент позиция 1
Now the scale is ready to measure your weight, as described in 4.2.
The measurement is automatically saved in the respective user memory. If necessary, a previous
measurement is exceeded.
Fig. 6
Fig. 5
Fig. 4
Fig. 3