Beurer BF 700 - Manual (Page 20)

20
For environmental reasons, do not dispose of the scale with the batteries in the household waste at the
end of its useful life. Dispose of the unit at a suitable local collection or recycling point.
Observe the local regulations for material disposal.
Please dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and
Electronic Equipment).
If you have any queries, please contact the appropriate local authorities.
13. What if there are problems?
If the scale detects and error when measuring, the following is displayed.
Display cause remedy
“ ” Unknown measurement as it
is outside the user assignment
limit or a unique assignment is
not possible.
Assign unknown measurement in app or
repeat user assignment.
“ ” runs across the
LcD.
The fat percentage is outside
the measurable range (less
than 3 % or greater than 65 %).
Repeat the measurement barefoot or, if
necessary, moisten the soles of your feet
slightly.
The maximum load-bearing
capacity of 180 kg was excee-
ded.
The load must not exceed 180 kg
or incorrect weight
is displayed.
No flat, stable surface. Place the scale on a flat, stable surface.
Attach the additional feet for carpet.
or incorrect weight
is displayed..
Not standing still. Stand as still as possible.
Incorrect weight is dis-
played.
Scale zero setting is incorrect. Wait until the scale switches itself off. Acti-
vate scale, wait for “ 0.0 kg” to appear and
repeat measurement.
no Bluetooth ® connec-
tion ( symbol is miss-
ing).
Device outside the range. The minimum range in a free field is approx.
25 m. Walls and ceilings reduce the range.
Other radio waves may interfere with the
transmission. Therefore, do not position the
scale near devices such as WLAN routers,
microwaves, induction hobs etc.
User memory space is full. No
more measurements can be
saved.
Open the app. The data is transferred auto-
matically. This may take up to one minute.
The batteries in the scale are
empty.
Replace the batteries of scale.