Beurer FCE 90 - Manual (Page 14)

14
5. Maintenance and cleaning
• When you are not using the device, store it in a cool, dry place away from direct light.
• Carefully clean the device after every use with a cleaning cloth. If necessary, use a slightly damp cloth.
Ensure that no water gets inside the device while cleaning it.
• Do not use any cleaning agents or solvents, as they could damage the device.
• Under no circumstances should you hold the device under water, as this can cause liquid to enter and
damage the device.
6. Replacement parts and wearing parts
Replacement parts and wearing parts are available from the corresponding service address (according to
the service address list). Please state the corresponding order number.
Item Item number and/or order number
Advanced Hydro Lift Cream (30 ml) 163.392
Intensive Cleansing Milk (200 ml) 163.394
7. What if there are problems?
Problem Cause Solution
There is nothing shown in the
device display
The mains adapter is not
plugged in correctly.
Check that the mains adapter is
correctly plugged in.
The device is not switched on. Press the ON/OFF button.
The heat and cool function is
not working
The mains cable is damaged.
Contact your retailer.
The device is damaged
8. Disposal
Observe the local regulations for material disposal. Dispose of the unit in accordance with EC
Directive 2002/96/EC – WEEE (Waste Electrical and Electronic Equipment). If you have any
questions, please contact the local authorities responsible for waste disposal.
9. Technical data
Model no. FCE 90
Input AC 100-240 V / 50~60 Hz / 0.5 A
Output DC 6.5 V / 2.46 A