Directed Electronics 1.3X - Manual (Page 12)

12 © 2008 Directed Electronics. All rights reserved.
Button
A U X
Lock
Command
: Press one time to Lock
Feedback
: Lock LED flashes for 1-sec with 1 beep.
Notes
: Press/hold for 1.5 seconds to Lock the system and then acti-
vate the Panic output*
A U X
Unlock
Command : Press one time to Lock
Feedback : Unlock flashes for 1-sec and remote beeps twice
Notes :
A U X
Remote
Start
Command
: Press one time to activate Remote Start
Feedback
: Remote Start LED flashes for 3-secs, remote start tones.
Notes
:
A U X
AUX
Command : Press and hold for 1.5 seconds to activate the Trunk Re-
lease.
Feedback : The AUX LED turns on for 3-secs and AUX activation tone
sounds.
Notes : This is an optional feature. See your sales rep/installer for
details.
A U X
Function
Shift
Command
: Press 1 to 4 times. ( See Function shift table.)
Feedback
: LED indicators turn on (according to the feature command)
Notes
: Each Press then release, shifts the function of the command
button.
Note: Feedback is available on the 2-way remote only.
* Horn honk is an optional feature. The panic and horn honk feature is avail-
able when this option is installed.
Pressing more than one button simultaneously generates an Error tone and the
"Function" LED turns on.