Besafe iZi Go ISOfix User Manual

Page 4

rrrrrt!

ISOfix installation

• It is NOT ALLOWED to mount the seat in a front

passenger seat WITH AN ACTIVATED AIRBAG.

• When installed with ISOfix: Make sure the indicators

are green before you drive.

• The floor support must always be used. Make sure that the

floor support is fully pushed down.

The insertion clips make the

installation easier. Click the

insertion clips onto the ISOfix

anchorage points on the vehicle

seat (between seat and backrest)

(1). The insertion clips should be

removed when not in use.

Release the floor support

from underneath the base.

Do this outside the car (2).

Pull the ISOfix release handle to a vertical position (3). Slide the

ISOfix connectors out of the base till the end stop (4).

Position the base on the car seat. Click the ISOfix connectors in

the ISOfix points on the vehicle seat. Make sure that both ISOfix

indicators are green (5).

Push the ISOfix release handle down in the base. Push the

ISOfix base as far as possible towards the backrest of the

vehicle seat (6).

(1)

(2)

click!

(4)

(3)

(5)

(6)