Besafe iZi Go User Manual

Page 4

Tighten the 3-point belt by

pulling the belt through the hip

belt hooks and through the

shoulder belt hook until it is

really tight (4).

Remove the shoulder belt from the shoulder belt hook at the rear

side.

Release the belt from the buckle in the car and remove the belt

from the hip belt hooks.

Leave the carrying handle in carrying position.

Removing the seat

Positioning the child

• To position your child, you can

fold the carrying handle behind

the seat in 2 positions, by

pressing both handle release

buttons (5).

• Position the shoulder straps: Check that the shoulder strap slots

are levelled with your child’s shoulders (6).

too high

too low

correct

(7)

• The height of the shoulder

straps can be adjusted by

pulling the harness height

adjuster out and moving the

adjuster up or down (7).

3- Guide the shoulder belt over

the blue part through the

shoulder belt hook at the rear

side of the seat shell (3).

(3)

(5)

Positioned in the back seat of the vehicle, you should push the

front seat of the vehicle backwards, so that it is in contact with

the child seat. Positioned in the front seat , you should push

the front seat forwards, so that the child seat is in contact

with the dashboard. If this is not possible, leave a space of

minimum 25 cm between child seat and back rest of the front

seat or dashboard.

(6)

(4)