Daewoo DSB-122L - Manual (Page 14)

13
FAN SPEEDS
“AUTO” The fan will automatically select the fan
speed.
“ ” The fan will operate on low speed.
“ ” The fan will operate on medium speed.
“ ” The fan will operate on high speed.
“NATURAL” The fan will randomly cycle through the
speeds simulating a cool breeze.
1. Press the ON/OFF button on the remote control to
turn the unit on; the On LED will light on the indoor
unit and “ON” will light in the
remote display.
2. Press the MODE button until the Heat indicator
appears in the display.
In the heat mode, the fan direction
or is further downward than
that in the cool mode for the good
circulation.
3. Using the TEMP. or buttons, set the desired
temperature. The desired temperature can be
changed up to 32°C and
down to 18°C.
4. To select the fan speed, press the FAN
SPEED button until the desired speed
appears in the display (see below).
TO SET HEAT MODE (DSB-122LH ONLY)
To set the unit to heat the room to a desired temperature, follow the procedures below:
NOTE:
When the heating orperation is started, hot air delivery
might be delayed due to warm up period.
1. Press the ON/OFF button on the remote control to
turn the unit on; the On LED will light on the indoor
unit and “ON” will light in the
remote display.
2. Press the MODE button to select the desired mode.
3. Press the FAN DIR. button to select
the fan direction. See chart below
for detailed information on each of
the three settings.
FAN DIR.
TO SELECT THE FAN DIRECTION
Regardless of the mode the unit is set for, the fan direction can be changed so it moves up and down, left and right or
both. Follow procedures below to set fan direction.
FAN DIR. The air will flow up
First Press and down.
Second
Normal air direction.
Press