Nut torque for connectors m8 connectors, M12 connectors, Torque socket wrenches – BECKHOFF CU2608 User Manual
Page 13
Mounting and cabling
CU2608
9
Nut torque for connectors
M8 connectors
It is recommended to pull the M8 connectors tight with a nut torque of 0.4 Nm.
M12 connectors
It is recommended to pull the M12 connectors tight with a nut torque of 0.6 Nm.
Torque socket wrenches
Ensure the right torque
Note
Use the torque socket wrenches available by Beckhoff to pull the connectors tight (see
accessories)!
See also other documents in the category BECKHOFF Hardware:
- CB1052 (86 pages)
- CB1061 (124 pages)
- CB2051 (77 pages)
- CB3052 (78 pages)
- CB3053 (69 pages)
- CB3056 (86 pages)
- CB3060 (113 pages)
- CB3063 (93 pages)
- CB4053 (69 pages)
- CB4053 (75 pages)
- CB4051 (70 pages)
- CB4052 (73 pages)
- CB4055 (85 pages)
- CB4058 (78 pages)
- CB4060 (114 pages)
- CB4063 (87 pages)
- Onboard SATA RAID (25 pages)
- C1120 (52 pages)
- C1220 (30 pages)
- C1300 (44 pages)
- M1110 (17 pages)
- M1400 (16 pages)
- M1410 (14 pages)
- M1600 (14 pages)
- M2400 (15 pages)
- M2510 (11 pages)
- M3120 (14 pages)
- M6330 (5 pages)
- M9110 (2 pages)
- PT100 (10 pages)
- II/O-Lightbus (9 pages)
- FC7502 (18 pages)
- CX1500-x520 (51 pages)
- FC5102 (95 pages)
- FC9062-0000 (43 pages)
- FM33xx (39 pages)