BECKHOFF CB4063 - Manual (Page 33)

GPIO Chapter: Connectors
Beckhoff New Automation Technology CB4063 page 33
3.15 GPIO
The General Purpose Input/Output interface is made available through a 2x10 pin connector (FCI
98424-G52-20LF, mating connector e.g. FCI 90311-020LF). To make use of this interface the SIO unit
must be programmed accordingly. Please refer to your sales representative for information on available
software support.
Pinout GPIO connector:
Description Name Pin Name Description
ground GND 1 11 3.3V 3.3V supply
GP Input/Output A00 GPIOA.0 2 12 GPIOB.0 GP Input/Output B00
GP Input/Output A01 GPIOA.1 3 13 GPIOB.1 GP Input/Output B01
GP Input/Output A02 GPIOA.2 4 14 GPIOB.2 GP Input/Output B02
GP Input/Output A03 GPIOA.3 5 15 GPIOB.3 GP Input/Output B03
GP Input/Output A04 GPIOA.4 6 16 GPIOB.4 GP Input/Output B04
GP Input/Output A05 GPIOA.5 7 17 GPIOB.5 GP Input/Output B05
GP Input/Output A06 GPIOA.6 8 18 GPIOB.6 GP Input/Output B06
GP Input/Output A07 GPIOA.7 9 19 GPIOB.7 GP Input/Output B07
3.3V supply 3.3V 10 20 GND ground