Etting, Ishwasher – Dacor MDW24S User Manual
Page 8
6
7
p
arts
of
the
C
ontrol
p
anel
Wash Cycle Buttons
START/STOP button. Use this button to start the dishwasher after selecting a wash
cycle or the rinse cycle (see page xx). It can also be used to pause the dishwasher in
the middle of a wash or rinse cycle (see page xx).
The
Auto-Wash setting senses the size of the load and the amount of soil, then auto-
matically selects the best wash cycle to clean the dishes and cookware properly. It takes
about 7 to 96 minutes to run.
The
heavy wash setting is best for very dirty tableware and cookware. It takes about 90
to 96 minutes to run.
The
Normal wash setting is best for normal soil on dishes and silverware. It takes about
78 to 96 minutes to run.
The
Short wash setting is best for lightly soiled or pre-rinsed dishes and silverware. It
is also good for lightly soiled items that have been pre-rinsed. It takes about 7 to 90
minutes to run.
Press the
Rinse button if you want to run the rinse portion of the cycle only. The dry
cycle will not run. Also, use this setting to rinse tableware that you do not want to wash
right away. Cycle time is about 0 minutes.
Special Feature Buttons
When the
hi-Temp feature is selected, the water is heated to about 140°F (60°C) during
the wash portion of the cycle. Washing at a higher temperature helps the detergent dis-
solve grease and grime better and the dishes dry more efficiently. It can be selected with
any wash cycle, but not
Rinse.
The
Sanitize feature rinses the dishware with rinse water heated to a temperature of
155°F (68°C) for maximum sanitization and drying (see page xx). It can be selected with
any wash cycle, but not
Rinse.
The
Delay start feature allows you to set the dishwasher to start at a later time (see
page XX).
Display
Display
G
ettinG
to
K
now
y
oUr
D
ishwasher