Dixon Grizzly ZTR KOH/968999628 - Manual (Page 45)

English - 45
MAINTENANCE
Filter replacement
1. Remove the end cover.
2. Remove the main fi lter (outer fi lter) by pulling
it out by hand.
3. Remove the inner fi lter by pulling it out by
hand.
4. Clean inside of the fi lter housing. Wipe dry
only.
5. Install the inner fi lter with the open end fi rst.
Ensure that it enters its recess at the end of
the housing and push it in to the end.
6. Install the main fi lter with the open end fi rst.
Ensure that it enters its recess at the end of
the housing and push it in to the end.
IMPORTANT INFORMATION
The end cover must be installed with
the rubber valve pointing downwards,
otherwise the rubber valve will not
function.
7. Turn the end cover with the rubber valve
pointing downwards and install it.
Air fi lter indicator (optional)
Change the main fi lter when the yellow piston is
hanging at the top of the cylinder. To reset the
indicator, push on the button (arrow) at the cylinder. A
number of pushes may be required. If it indicates soon
after a main fi lter replacement, change the inner fi lter.
Removing the main fi lter
8011-449
Removing the inner fi lter
8011-450
Air fi lter indicator
8011-467