Dixon 6025 - Manual (Page 14)

Page 14
CONTROLS
PARKING BRAKE:
The parking brake is designed to hold the mower from moving and is not
intended for use in stopping the mower while it is in motion.
TO SET PARKING BRAKE:
The hand operated parking brake is located at right hand side
of mower.
To engage brake, pull rearward.
To release brake, move lever forward.
NOTE: Always set parking brake before dismounting.
Release parking brake before moving mower.
HYDRO-GEAR DRIVE SYSTEM:
Allows the mower to turn on its own axis (zero turning radius).
Each lever controls one side of the mower.
NOTE: The pressure required to operate the mower is very light.
CAUTION
Engage parking brake before starting engine